Office Pro 18

The MovinCool Office Pro 18 portable air conditioner is specifically designed to provide cooling for computer rooms and data centers filled with heat-generating electronics.
  • 16,800 Btu/hr Cooling Capacity
  • Highest capacity possible from a standard 115V power source
  • No costly installation
Office Pro Series Classic Series
Office Pro 12
Office Pro 24
Office Pro 36
Office Pro 60
Office Pro 63
Classic 10
Classic Plus 14
Classic 18
Classic Plus 26

Specifications

 
Electronic Features Control Panel Programmable
Thermostat Control Electronic
Cooling Capacity Rating Conditions:
95F at 60% RH
16,800 Btu/h
Electrical
Characteristics
Voltage
Requirement
1 Phase, 115V
Total Power
Consumption
1.7 kW
Current
Consumption
15.6 amps
Recommended
Fuse Size
20 amps
NEMA Plug
Configuration
5 - 20
Min. Max.
Voltage
105 - 125
Fans Motor Output 0.24/0.17 kW
 
Evaporator Fan Type Centrifugal
Max.Air Flow
high/low
540/500 CFM
Max. External
Static Pressure
0.31 IWG
Condenser Fan Type Centrifugal
Max.Air Flow
high/low
770/710 CFM
Max. External
Static Pressure
0.23 IWG
Compressor Type Hermetic Rotary
Output 1.16 kW
Refrigerant R-410A 1.54 lb
Dimensions W x D x H 21 x 27 x 44 in
Net Weight/
Shipping Weight
  170/201 lb
Power Cord Gauge 12 AWG (3- core)
Length 10 ft
Condensate
Tank Capacity
  5 gal
Operating Conditions Min. Max. (@ 50% RH) 65°-95°F
Max. Duct
Length
Per Cold
Duct Hose
25 ft
Hot Duct Hose 100 ft
Max.
Sound Level
With Condenser -
Duct high/low
61/59 dB(A)
Without Condenser -
Duct high/low
62/60 dB(A)
NOTE: All specifications subject to change without notice.
Spot Cooling Portable design brings 16,800 Btu/hr cooling to the area or room in a highly efficiently way to cool “hot spots.”
Weekend/After-hours Cooling Cost-effective cooling alternative for weekend or after-hours cooling when the building’s air conditioner is shut down
Programmable Controller Backlit control panel with seven-day programming capability allows easy viewing even in low-light conditions
Sensitive Electronic Cooling Provides cooling down to 65°F for ideal environmental conditions
Easy to Install No costly installation necessary – roll it in, plug it in, and turn it on
Affordable Insurance Policy Store unit in closet, and install within minutes when the permanent air conditioner is no longer sufficient or completely fails
Automatic Restart Returns the unit to its last operating status in the event of a power failure
Freeze Protection Temperature sensor on evaporator coil prevents ice buildup, which can cause blockage of cool airflow and water leaks

Accessories

No. Part Name Office Pro 18 - Part Description Part Number
1. Nozzle Adapter Kit Two-piece metal frame converts airflow from louvers to nozzles or cold air ducts. Includes mounting screws. (Nozzles and ducts sold separately.) LA481769-0170
2. Nozzle Kit 5" diameter white plastic nozzle that extends up to 2' in length. Includes flange, mounting screws and trim ring. (Purchase in sets of two.) LAY84209-0030
3. Cold Air Flange Kit 5" diameter white metal flange with wire clamp and mounting screws. Use with cold air ducts. 481170-0180
4. Cold Air Extension Duct 5" diameter, white plastic duct that extends from 6-1/2' to 10' in length. 481744-0090
5. Trim Ring 5" diameter black plastic ring mounts as end caps for extension duct. 481851-0200
6. Warm Air Self Supported Duct 12" diameter white, plastic duct that extends 6-1/2' to 10' in length 481744-0060
6A. Warm Air Flexible Duct Kit 12" diameter wire-reinforced, accordion-style duct in 10' length for condenser exhaust. Includes clamp. LAY45771-0060
7. Ceiling Tile 24" x 24" white tile with 12" hole for warm air self-supported duct. LA146373-8280
8. Condenser Air Plenum White plastic plenum for return air to condenser. Hinged for filter cleaning. LAY84270-008A
9. Condensate Pump Kit 110V pump kit includes 3/8"diameter x 20' length hose and installation hardware. LA484789-0080

Photos...